An instrument specifically designed to be used to check the calibration and performance of linear and non-linear medical accelerator systems used for radiation therapy applications, for quality assurance (QA) purposes. It includes a variety of instruments used to measure parameters associated with particle and photon beam production, beam quality, and other system performance parameters.
Do not keep device in water for longer than 24 hours.
Special Storage Condition, Specify
0
0
Do not store the instrument in the treatment room.
Special Storage Condition, Specify
0
0
Ensure that all device parts, including cable and connector, are clean and dry before placing in storage case. Dry with a soft cloth. Never use abrasive cleaners.
Special Storage Condition, Specify
0
0
For transport and storage within the facility, the device can remain attached to the Water Tank, but it is recommended to store the device in its case when not in use.
Special Storage Condition, Specify
0
0
If connector is accidentally immersed in water, allow to dry completely before connecting to 3D SCANNER.
Special Storage Condition, Specify
0
0
Never expose the device's electronic circuits to the direct radiation beam.
Special Storage Condition, Specify
0
0
Never leave the instrument on the couch during delivery system warm up.
Special Storage Condition, Specify
0
0
Store device in an indoor, climate-controlled environment where it will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.