Dispense HPRplus TM Cream into palm of hand and apply to affected area 3 times per day, or as directed by a physician. Massage gently into the skin until completely absorbed. If the skin is broken, cover with appropriate dressing.
HPRplusTM is indicated to manage and relieve the burning, itching and pain experienced with various types of dermatoses, including atopic dermatitis, allergic contact dermatitis and radiation dermatitis. HPRplusTM also helps to relieve dry, waxy skin by maintaining a moist wound & skin environment, which is beneficial to the healing process.
CONTRAINDICATIONS:
CONTRAINDICATIONS SECTION
HPRplusTM is contraindicated in persons with a known hypersensitivity to any of the components of the formulation.
WARNINGS:
WARNINGS SECTION
Use only as directed. Keep out of the reach of children. Avoid contact with eyes. For topical use only. Not for ophthalmic use. Do not apply within four hours prior to a radiation session. HPRplusTM Emollient Foam: Contents under pressure. Do not puncture or incinerate container. Do not expose to temperatures above 120ºF (49ºC).
PRECAUTIONS AND OBSERVATIONS:
PRECAUTIONS SECTION
HPRplusTM does not contain a sunscreen and should not be used prior to extended exposure to the sun.
If clinical signs of infection are present, appropriate treatment should be initiated; use of HPRplusTM may be continued during the anti-infective therapy.
If the condition does not improve within 10-14 days, consult a physician.
HPRplusTM may dissolve fuchsin when this dye is used to define the margins of the radiation fields to be treated.
DIRECTIONS - CREAM:
INSTRUCTIONS FOR USE SECTION
Dispense HPRplusTM Cream into palm of hand and apply to affected area 3 times per day, or as directed by a physician. Massage gently into the skin until completely absorbed. If the skin is broken, cover with appropriate dressing.
DIRECTIONS - EMOLLIENT FOAM:
INSTRUCTIONS FOR USE SECTION
Important: Prime Can Before Initial Use.
To Prime Can: Shake can vigorously (until product moves inside can). Firmly strike bottom of can onto palm of other hand or a hard surface at least 3 times. Hold the can upright and direct initial spray to a non-skin surface. Until foam dispenses, DO NOT spray directly on the skin as the initial spray may expel cold liquid propellant. Press down on actuator for 1-3 seconds until foam begins to dispense. If foam does not dispense within 3 seconds, prime can again.
Before Each Use: Shake can vigorously. Firmly strike bottom of can onto palm of other hand or a hard surface at least 3 times.
During Use: Holding can upright, dispense HPRplusTM Emollient Foam into palm of hand and apply to affected area 3 times per day, or as directed by a physician. Massage gently into the skin until completely absorbed. If the skin is broken, cover with appropriate dressing. Wipe off any excess foam from actuator after use.
HPRplusTM Emollient Foam also contains Hydrofluorocarbon 134a (propellant).
HOW SUPPLIED:
HOW SUPPLIED SECTION
HPRplusTM Cream is available in 100 g tubes (NDC 42546-030-10) and 450 g jars (NDC 42546-030-45). HPRplusTM HydroGel is available in 225mL bottles (NDC 42546-033-99) HPRplusTM Emollient Foam is available in 100 g (NDC 42546-025-10) and 150 g (NDC 42546-025-15) canisters. HPRplusTM Emollient Foam will not dispense entire contents. Container is overfilled to guarantee dispensing at least the listed amount.
Caution: Federal law restricts this device to sale by or on the order of a physician or other licensed heath care practitioner.
Store between 590 and 860 F (150 and 300 C). Protect from freezing. HPRplusTM Emollient Foam: Store upright.
Manufactured for: PruGen, Inc. Pharmaceuticals Scottsdale, AZ 85255 www.prugen.com Rev 2.0
PRINCIPAL DISPLAY PANEL - Kit Carton
PACKAGE LABEL.PRINCIPAL DISPLAY PANEL
NDC 42546-033-10
HPR PLUS™ HydroGel KIT
CONVENIENCE KIT INCLUDES: 1 Bottle (225 ml) of HPRplus™ HydroGel 1 Tube (100 g) of HPRplus™ Cream
OpenFDA label data provides additional search and identifier links. DailyMed’s Structured Product Label is the canonical label on FDA.report. Matching records are deduplicated before they are shown below.